|
Dragonlair
USA
2888 Posts |
 Posted - 02/14/2013 : 20:50:49
|
Mirror mode is not designed to "adjust" an existing pattern. It is designed for BUILDING a pattern. When you define it, you define the "center line" and when you place a stitch, a "matching stitch" is made across center line as if it were a mirror.
To do what you wish to do, mark your pattern (select it all). Specify a copy. Then request a paste and you can tell it to do a "flip" either horizontally and/or vertically and then carefully place the copy beside the original to make a mirror. make sure you pattern area is large enough (width and length) to take the copy.
Good Luck,
Diane
There is no such thing as a stupid question
|
 |
|
'MIRROR MODE'
