| T O P I C R E V I E W |
| carnation1520 |
Posted - 07/24/2014 : 19:51:02
I just up graded to Pc Stitch 10, my problem is in the bottom right hand corner of the screen you can track your stitches but if you have more then 99 stitches in a row or Colum half of the third number is cut off. how do I fix this? |
| 5 L A T E S T R E P L I E S (Newest First) |
| Dragonlair |
Posted - 07/27/2014 : 12:24:20
Look for the username "Mark" or use the contact us form for the software itself. Either way should get to him. If you look for any of his posts, he's often got his email address posted.
Diane
There is no such thing as a stupid question
|
| carnation1520 |
Posted - 07/27/2014 : 11:27:25
thank you for your time, and just how do I get in touch with mark? |
| Dragonlair |
Posted - 07/26/2014 : 20:26:05
I just loaded a pattern I got from Ellen Maurer-Stroh (EMS071 - Cockatoo Sampler) that is 270 X 210 stitches.
I looked in the lower right hand corner and it displays the entire numbers for both directions.
I am running Windows 7 SP1 64 bit on an HP machine and I am using high DPI (set to 150% to make the text of the menus readable at my 1920 X 1080 default recommended resolution).
I made the comment about the high dpi because an earlier version of PCStitch did have problems when "large fonts" was defined (now called High DPI). The problem was fixed and it affected many parts of the program.
I have seen it even on this machine with Kindle for PC. The sizes of my collections was somewhat difficult to read for the problem you describe. That's why I made the comment I did. A more recent update of Kindle for PC has fixed the problem.
It is not bad coding. There is probably something in your system, possibly the graphics card that is not completely compatible with this version of PCStitch. As it has been released for several years now, I still suggest you bring this to the attention of Mark. He's the only one who can address the issue.
Diane
There is no such thing as a stupid question
|
| carnation1520 |
Posted - 07/26/2014 : 17:13:49
I guess I will have to limit my patterns to a grid of 99 x 99 seeing that this product can not handle any thing larger.
For you to suggest that a font size my be to large, leads me to think that this is an inferior product
Before you jump the gun try loading a new pattern of 125 by 125 stitches and go to the bottom right hand corner and look for your self, at this point there is no font involved.
This part of the program works in version 9, so why not in version 10??? At this time I would have to tell people not to invest in this program |
| Dragonlair |
Posted - 07/24/2014 : 20:11:16
Are you running with a larger font size (in your display options). That could cause it.
I would check with Mark on this issue. I don't know how to fix this sort of thing.
Diane
There is no such thing as a stupid question
|
